30KN Hydraulic Cable Tensioner Used For OPGW ADSS Transmission
Project
Brief Introduction:
30KN Hydraulic Cable Tensioner Used For OPGW ADSS Transmission
Project
A transmission line tension stringing and aerial cableway erection
job tension of the tension machine. The liner is fixed round groove
of the main driven wheels arranged in parallel composition, and a
diameter of the driven wheel driving wheel diameter 0.6 to 0.95,
the master, the driven wheel two further fixed wheel and two or
more groove substrate. When the wire is rotated by external
traction rounds, only the large diameter drive wheel braking force
that is applied. Selection round slot liner material of different
coefficient of friction the wire by force, to avoid wire lantern,
to protect the wire and release the tension wheel uniform wire.
While the whole weight, smaller in size and lower cost.
Principle:
30KN Hydraulic Cable Tensioner Used For OPGW ADSS Transmission
Project
Automatic hydraulic tensile machine manufacturer in Germany ZECK
Features: Each friction wheel is driven by a hydraulic motor
planetary gear transmission efficiency, frustrated not stop and
then start producing sheet when the wire damage. Friction wheel
with a special pad to protect the wires, replace the easy life
assurance work up to 1200 hours. Patents have ground and pressure
line features automatic rope fixed.
Application:
30KN Hydraulic Cable Tensioner Used For OPGW ADSS Transmission
Project
30KN Hydraulic Wire Conductor Tensioner Used in 220KV Overhead Line
Transmission is used to string various conducts and earthwire.
Technical Data:
30KN Hydraulic Cable Tensioner Used For OPGW ADSS Transmission
Project
| Model Type | YQZ30 |
| Overall Size(MM) | 3560 ×1600 ×2220 |
| Weight(KG) | 1700 |
| Max Tension(KN) | 30 |
| Max Continual Tension(KN) | 25 |
| Max Velocity(km/h) | 5 |
| Diameter of Tension wheel(mm) | 1200 |
| Solt No. of Tension wheel | 5 |
| Rated Pulling Force (KN) | 30 |
| Max Pulling Speed(km/h) | 5 km/h |
| Max dia of wire | Φ32mm |
| Engine Power | 11KW/ 2200 r/min |
| Voltage | 12V |
Feature:
30KN Hydraulic Cable Tensioner Used For OPGW ADSS Transmission
Project
1. Bullwheel with wearproof MC nylon lining segments.
2. infinitely variable tension control and constant tension
conductor stringing .
3. it adapt Italian reducer .
4. spring applied hydraulic released brake acts automatically in
case of hydraulic
failure to ensure safety
Main component:
30KN Hydraulic Cable Tensioner Used For OPGW ADSS Transmission
Project
1. Engine :Domestic water –cooled engine .
2. Main pump/motor ,Chinese famous branded pump and motor .
3. Reducer :RR(Italian )
4. Radiator: AKG
5. Hydraulic instrument : WIKA
6. It can choose import engine.
